Expert Answers about Mazda Tow Bar Wiring

• Recommended Tow Bar Wiring Harness & Flat Tow Setup For A 2021 Jeep Wrangler
• The Blue Ox Tow Bar Wiring Kit BLU86XR you mentioned is actually designed to fit 2014-2022 Jeep Grand Cherokee's with a tow package, as well as a 2022 Jeep Grand Cherokee without a tow package. With that being said, this kit is not going to be the correct kit for your 2021 Jeep Wrangler, unfortunately. Instead, what you're going to need instead is the Curt Custom Tail Light Wiring Kit for Towed Vehicles # C96JR. This is going to be the same wiring harness as the Blue Ox Tow Bar Wiring...
  view full answer...


• 2019 Jeep Wrangler Trailer Wiring Recommendation to Work with Tow Bar Wiring
• Thanks for reaching out, Paul! The wiring you're looking for is the T-One Vehicle Wiring Harness # 118786 from Tekonsha. Not only is this the most reliable kit we have for your 2019 Jeep Wrangler, but it also tees in behind your tail lights so it will work in tandem with any tow bar wiring you've installed or will be installing on your vehicle. If you don't already have a trailer hitch then I also recommend installing the etrailer Trailer Hitch Receiver # e98856 because of the matte black...
  view full answer...


• Custom Flat Tow Wiring Harness For A 2008 Jeep Wrangler
• I went ahead and checked out the Blue Ox Tow Bar Wiring Kit BLU79FR, and it actually is only deigned to fit the 2018-2021 Jeep Wranglers. Instead, I recommend installing the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles # HM56200. This wiring harness will plug directly into your vehicle's wiring harness, and is guaranteed to fit your 2008 Jeep Wrangler.
  view full answer...


• Base Plates For 2014 Honda Pilot For Flat Towing
• Hey Robert, We do have a tow bar base plate for your 2014 Honda Pilot, as well as the rest of parts needed to flat tow it: - Base Plate Kit: Blue Ox Base Plate Kit # BX2251 - Tow Bar: etrailer SD Non-Binding Tow Bar for Blue Ox and Curt Base Plates # e47ZR - Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 - Supplemental Braking System: Brake Buddy Classic 3 Portable Flat Tow Brake System # HM39494 Blue Ox has a deserved reputation for the quality of...
  view full answer...


• All Parts Needed to Flat Tow 2023 Ford F-350 Behind Motorhome
• Hi Mark, We can definitely get your 2023 Ford F-350 set up to be flat towed behind your motorhome, and I'll go ahead and list out all the parts needed for you to make it easy to order. - Base Plate Kit: Demco Classic Base Plate Kit # DM68FR - Tow Bar: Demco Excali-Bar III Non-Binding Tow Bar # DM9511013 - Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 - Supplemental Braking System - Motorhome with HYDRAULIC BRAKES: Demco SBS Stay-IN-Play DUO Supplemental...
  view full answer...


• Recommended Flat Towing Components For A 2023 GMC Canyon AT4x Towed Behind A Dodge Ram 3500
• To flat tow your 2023 GMC Canyon AT4X behind a 2014 Dodge Ram 3500 you'll need the following components: Baseplate: Blue Ox Base Plate Kit # BLU85CR. This is the only option currently confirmed to fit the AT4X models, per Blue Ox. Tow Bar: etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates # e47ZR. This tow bar comes with safety cables and an adjustable head/shank to help keep the tow bar level between the Ram and Canyon. Tow Bar Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil...
  view full answer...


• Recommended Baseplate For A 2019 Jeep Wrangler Sport With A Roadmaster Blackhawk Tow Bar
• For a 2019 Jeep Wrangler Sport and Roadmaster Blackhawk tow bar # RM-422 you would need the Roadmaster Direct-Connect Base Plate Kit # RM-521453-5. If you haven't picked out the rest of your flat towing components then I have the following recommendations for you: Tow Bar Wiring Kit: Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles # RM-152-1676-7. This wiring kit will display your motorhome's traffic signals through the tail lights of the Jeep. The straight portion of this cable...
  view full answer...


• Recommended Flat Towing Components For A 2022 Jeep Gladiator
• Hi Randy, For your 2022 Jeep Gladiator I have the following flat towing component recommendations: Baseplate: If you have a standard model with a factory bumper or a Rubicon with a factory bumper then you can use the Roadmaster Direct-Connect Base Plate Kit # RM-521453-5. If you have a non-base model (Mojave) or non-factory bumper then let me know and we can figure out what will fit. Tow Bar: etrailer XHD Non-Binding Tow Bar # e84ZR. This tow bar comes with safety cables already included...
  view full answer...


• Recommended Blue Ox Flat Towing Components For A 2020 Jeep Grand Cherokee Trailhawk
• Hey Lisa, To flat tow your 2020 Jeep Grand Cherokee Trailhawk you'll need the Blue Ox Tow Bar Wiring Kit # BLU86XR. This wiring harness comes with connectors to plug inline with your factory tail light wiring. If you haven't picked out the rest of your flat towing components, besides the Blue Ox Baseplate # BX1128, then I have the following recommendations: Tow Bar: etrailer XHD Non-Binding Tow Bar for Blue Ox Base Plates # e67ZR. This tow bar comes with safety cables included, a holder...
  view full answer...


• Recommended Base Plate Kit and Tow Bar Wiring for 2014 Honda CR-V
• Since you already have a Blue Ox tow bar I would stick with the same for base plates. The Blue Ox Base Plate Kit # BX2258 is what you need for your 2014 CR-V. Then for wiring I recommend the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267. You also need to check your owner's manual since fuses must be pulled during towing so you will want to add a fuse bypass. If it says to only pull the #19 ACC radio fuse you need the Roadmaster FuseMaster Fuse Bypass # RM76511. If...
  view full answer...


• Recommended Baseplate and Adapter to Tow a 2010 Jeep Wrangler w/ a Blue Ox Tow Bar
• Yes, it will! The Blue Ox Tow Bar Adapter Brackets item # e98986 will allow you to connect your Blue Ox Aventa II BX7335 tow bar to the etrailer Invisible Base Plate Kit item # e98949 that is confirmed to fit a 2010 Jeep Wrangler. No, you will not need a a clevis. The etrailer Invisible Base Plate Kit item # e98949 fits the 2010 Wranglers with the factory bumper. I have linked an installation video below to help you get it set up. Here are the rest of the parts you will need to flat...
  view full answer...


• Recommended Flat Towing Parts for a 2009 Smart Fortwo
• I would be happy to make some suggestions for you! To flat tow your 2009 Smart Fortwo you will need the following parts: Tow Bar and Safety Chains - etrailer SD Non-Binding Tow Bar item # e44ZR Base Plate Kit - Roadmaster EZ Base Plate Kit item # 52285-1 Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267 Battery Disconnect Switch - Roadmaster Automatic Battery Disconnect item # RM-766 Blue Ox Patriot Portable Flat Tow Brake System item # BLU37TR High...
  view full answer...


• 2024 Chevy Equinox Base Plate Kit and Wiring to Match up with Blue Ox Tow Bar
• Hey Joe, thanks for reaching out! Since you already have the Blue Ox tow bar you'll want the Curt Custom Base Plate Kit # C28FR for your 2024 Chevy Equinox because it matches up directly with your tow bar. Then for wiring I recommend the Roadmaster wiring which is part # RM26FR for an LS or LT and then part # RM38FR for a Premier. If you already have a 6-Way to 7-Way adapter then you need parts # RO94FR and # RO44FR respectively. It looks like you'll also need to disconnect your battery...
  view full answer...


• Best Flat Towing Parts for a 2023 Lincoln Nautilus
• So long as you have the 2.7L V6 engine, the best parts to flat tow your 2023 Lincoln Nautilus with are listed below: Tow Bar and Safety Chains - etrailer SD Non-Binding Tow Bar for Roadmaster Direct-Connect Base Plates item # e74ZR Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item # RM57RR Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267 Battery Disconnect - Roadmaster Battery Disconnect with Switch for Towed Vehicle...
  view full answer...


• Recommended Flat Towing Components For A 2023 Jeep Cherokee Trailhawk
• To flat tow your 2023 Jeep Cherokee Trailhawk you'll need the following components: Baseplate: I recommend the Roadmaster Direct-Connect Base Plate Kit # RM-521451-5 if you don't have active air shutters. If you do then you'll want the Blue Ox Base Plate Kit # BX1143 instead. Tow Bar: If you go with the Roadmaster baseplate you'll need the etrailer SD Non-Binding Tow Bar for Roadmaster Direct-Connect Base Plates # e74ZR. For the Blue Ox baseplate you'll need part # e47ZR instead. These...
  view full answer...


• Parts Needed to Flat Tow 2018 Jeep JK Wrangler Unlimited
• To flat tow your 2018 Jeep JK Wrangler Unlimited you will need a base plate kit, tow bar, tow bar wiring, safety cables, and a supplemental braking system. I recommend the following: -Roadmaster Direct-Connect Base Plate Kit # RM-521448-5 (For standard factory bumper) -Roadmaster Falcon 2 Tow Bar # RM-520 -RoadMaster 68" Single Hook, Coiled Safety Cables # RM-643 -Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 -Demco Stay-IN-Play Duo Flat Tow Brake System # SM99251 OR -For...
  view full answer...


• Recommended Base Plate for a 2006 Scion TC w/ Fog Lights
• Yes, you can! I checked with Roadmaster and their Crossbar-Style Base Plate Kit item # 1176-1 is compatible with your 2006 Scion tC with fog lights. The fog lights will have to be removed and not reinstalled. This is detailed in section 6 of the instructions which I have attached below. I have also linked an installation video. Ours did not have the fog lights to remove though. Here are some other parts you will need to flat tow your 2006 Scion tC: Tow Bar and Safety Chains - Roadmaster...
  view full answer...


• Recommended Flat Towing Components For A 2007 Toyota 4Runner
• For a 2007 Toyota 4Runner I have the following recommendations: Baseplate: Blue Ox Base Plate Kit # BX3758. Tow Bar: etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates # e47ZR. This tow bar is going to include the safety cables and comes with an adjustable head to help stay level between the motorhome and 4Runner. Tow Bar Wiring Kit: Tekonsha Tail Light Isolating Diode System with 4-Pole Connector # TR118821. This wire harness will allow you to display your motorhome's traffic...
  view full answer...


• Adapter Needed To Connect A Demco Dominator Tow Bar To A Curt Baseplate
• To connect the Demco Dominator Non-Binding Tow Bar # DM9511008 to the Curt Custom Base Plate Kit # C38FR you referenced you'd just need to use the Demco # DM9523041. This adapter has the same spread as the arms on the Curt baseplate making it a compatible adapter. If you didn't want to have to use an adapter then you could switch to the Demco Tabless Base Plate Kit # DM9519292 instead of the Curt # C38FR. If you haven't picked out the rest of your flat towing components then I have the...
  view full answer...


• List of Everything Needed to Flat Tow 2023 Jeep Wrangler
• Hi Tony, thanks for writing in and yes, we can 100% get your 2023 Jeep Wrangler set up to be flat towed behind your Holiday Rambler motorhome. To make it easy to order I'll go ahead and list everything out for you. - Base Plate Kit: Roadmaster Direct-Connect Base Plate Kit # RM-521453-5 - Tow Bar: Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar # RM-676 - Wiring Kit: Roadmaster Universal Hy-Power Diode Wiring Kit # RM-152 OR Wiring Kit with Smart Diodes # RM47ZR (See below explanation...
  view full answer...